A catalogue of modules and programmes available from the School of Electronic and Communications Engineering.
Module Details: TDSY4602
This module is used in DT021.4.
This module is not a prerequisite or corequisite for any other module.
|Code||TDSY4602||The unique code for this module.|
|Name||Time Delay Systems||The name of this module.|
|ECTS||5||The number of credits awarded for successful completion of this module.|
|School||School of Control Systems and Electrical Engineering||The School responsible for this module.|
|Level||Honours Degree (NQAI level 8)||The level of programmes that normally use this module.|
|Stage||4||The programme stage at which this module is normally given.|
|Duration||13 weeks||The time that this module usually lasts.|
|Prerequisite||CONT2602||Codes of any modules that must be completed before this module can be started.|
|Corequisite||Codes of any modules that must be taken at the same time as this one.|
|Author||Aidan O’Dwyer||The person who wrote the module descriptor.|
|Keywords||The areas that this module is related to.|
|Description||This is a module on process control, firstly introducing the learner to the principles and techniques of identification and controller tuning. Subsequently, practical controller algorithms used in the process industry are covered in detail.||A brief description of the module.|
|Revision||04 Jun 2007||The date of last revision of this information.|
|LectureHrs||2 hours/week||The number of hours per week of lectures for this module.|
|TutorialHrs||None||The number of hours per week of tutorials for this module.|
|LabHrs||2 hours/week||The number of hours per week of practical laboratory work for this module.|
|Descriptor||TDSY4602.pdf (uploaded 26 Apr 2007)||Full details of the module.|
Note: Some documents are accessible only from inside the DIT.