A catalogue of modules and programmes available from the School of Electronic and Communications Engineering.
Module Details: ELEK2208
This module is used in DT008.2.
|Code||ELEK2208||The unique code for this module.|
|Name||Digital Electronics and VLSI 1||The name of this module.|
|ECTS||5||The number of credits awarded for successful completion of this module.|
|School||School of Electronic and Communications Engineering||The School responsible for this module.|
|Level||Ordinary Degree (NQAI level 7)||The level of programmes that normally use this module.|
|Stage||0||The programme stage at which this module is normally given.|
|Duration||13 weeks||The time that this module usually lasts.|
|Prerequisite||ELEK1189, ELEK1289||Codes of any modules that must be completed before this module can be started.|
|Corequisite||Codes of any modules that must be taken at the same time as this one.|
|Author||Kevin Berwick, Domnick Nardone||The person who wrote the module descriptor.|
|Keywords||Electronics, VLSI||The areas that this module is related to.|
|Description||This module is an introduction to modern digital design techniques using Electronic Design Automation (EDA) tools.||A brief description of the module.|
|Revision||02 Oct 2007||The date of last revision of this information.|
|LectureHrs||3 hours/week||The number of hours per week of lectures for this module.|
|TutorialHrs||1 hour/week||The number of hours per week of tutorials for this module.|
|LabHrs||2 hours/week||The number of hours per week of practical laboratory work for this module.|
|Descriptor||ELEK2208.pdf (uploaded 15 Nov 2006)||Full details of the module.|
Note: Some documents are accessible only from inside the DIT.