A catalogue of modules and programmes available from the School of Electronic and Communications Engineering.
Module Details: ELEK1201
This module is used in DT080.1.
This module is not a prerequisite or corequisite for any other module.
|Code||ELEK1201||The unique code for this module.|
|Name||Physical Computing 2||The name of this module.|
|ECTS||5||The number of credits awarded for successful completion of this module.|
|School||School of Electronic and Communications Engineering||The School responsible for this module.|
|Level||Ordinary Degree (NQAI level 7)||The level of programmes that normally use this module.|
|Stage||2||The programme stage at which this module is normally given.|
|Duration||13 weeks||The time that this module usually lasts.|
|Prerequisite||ELEK1101||Codes of any modules that must be completed before this module can be started.|
|Corequisite||Codes of any modules that must be taken at the same time as this one.|
|Author||Tony Grennan||The person who wrote the module descriptor.|
|Keywords||The areas that this module is related to.|
|Description||This module continues the main themes from part 1 but with increased emphasis on the total development of a physical computing application by a small groups of studentst. Fundamental knowledge of basic electrical and electronic components and systems, to support physical computing systems, is treated.||A brief description of the module.|
|Revision||26 Oct 2011||The date of last revision of this information.|
|LectureHrs||1 hour/week||The number of hours per week of lectures for this module.|
|TutorialHrs||The number of hours per week of tutorials for this module.|
|LabHrs||3 hours/week||The number of hours per week of practical laboratory work for this module.|
|Descriptor||ELEK1201 Physical Computing 2.pdf (uploaded 26 Oct 2011)||Full details of the module.|
Note: Some documents are accessible only from inside the DIT.