A catalogue of modules and programmes available from the School of Electronic and Communications Engineering.
Module Details: ELEC1289
This module is used in DT008.1.
|Code||ELEC1289||The unique code for this module.|
|Name||Electric Circuits and Devices 2||The name of this module.|
|ECTS||5||The number of credits awarded for successful completion of this module.|
|School||School of Electronic and Communications Engineering||The School responsible for this module.|
|Level||Ordinary Degree (NQAI level 7)||The level of programmes that normally use this module.|
|Stage||1||The programme stage at which this module is normally given.|
|Duration||13 weeks||The time that this module usually lasts.|
|Prerequisite||ELEC1189||Codes of any modules that must be completed before this module can be started.|
|Corequisite||Codes of any modules that must be taken at the same time as this one.|
|Author||Martin O’Hanlon||The person who wrote the module descriptor.|
|Keywords||Electronics||The areas that this module is related to.|
|Description||This module continues the introduction of the students to the analysis of electrical circuits and to semiconductor devices. The teaching of the module is divided equally between lecture time and laboratory time. Laboratory work will continue to be practical in nature but may involve some circuit simulation using PSpice. PSpice enables students to model the various topics covered in the lectures.||A brief description of the module.|
|Revision||04 Jun 2007||The date of last revision of this information.|
|LectureHrs||2 hours/week||The number of hours per week of lectures for this module.|
|TutorialHrs||None||The number of hours per week of tutorials for this module.|
|LabHrs||2 hours/week||The number of hours per week of practical laboratory work for this module.|
|Descriptor||ELEC1289.pdf (uploaded 15 Nov 2006)||Full details of the module.|
Note: Some documents are accessible only from inside the DIT.