School of Electronic and Communications Engineering

Sat, 18 Nov 2017 - DIT week 12

Home > Module Catalogue

Information for

Information about

Research

[AHFR logo] [prc logo] [CNRI logo]

Module Catalogue

A catalogue of modules and programmes available from the School of Electronic and Communications Engineering.

Module Details: EESY2601

This module is used in DT021.2.

This module is not a prerequisite or corequisite for any other module.

CodeEESY2601 The unique code for this module.
NameIntroduction to Electrical Energy SystemsThe name of this module.
ECTS5The number of credits awarded for successful completion of this module.
SchoolSchool of Control Systems and Electrical EngineeringThe School responsible for this module.
LevelHonours Degree (NQAI level 8)The level of programmes that normally use this module.
Stage2The programme stage at which this module is normally given.
Duration13 weeksThe time that this module usually lasts.
PrerequisiteMATH1301, ELEC1600Codes of any modules that must be completed before this module can be started.
CorequisiteCodes of any modules that must be taken at the same time as this one.
AuthorJane Courtney, Michael FarrellThe person who wrote the module descriptor.
KeywordsPower SystemsThe areas that this module is related to.
DescriptionThis is an introductory module dealing with the area of electrical power systems and electromechanical energy conversion. The concept of electromechanical energy conversion and mechanical performance of common motors is analysed using torque–speed characteristics and rating plate information. The module introduces the concepts and techniques required for the analysis of three-phase power systems. The equivalent circuit technique is used in the performance analysis of single-phase transformers and machines.A brief description of the module.
Revision04 Jun 2007The date of last revision of this information.
LectureHrs3 hours/weekThe number of hours per week of lectures for this module.
TutorialHrsAs neededThe number of hours per week of tutorials for this module.
LabHrs2 hours/weekThe number of hours per week of practical laboratory work for this module.
DescriptorEESY2601.pdf (uploaded 17 Apr 2007)Full details of the module.

Note: Some documents are accessible only from inside the DIT.